Does landscape lighting wire need to be buried?

Bury these cables at least 6 inches. On protected planting beds, the low-voltage cable can simply be covered with mulch or soil. When burying garden lighting cable systems, you will need to dig a trench 6 inches deep into the ground or mulch. To do this, you can use a thin and sharp shovel, which will allow you to create an angled trench more quickly and seal it more tightly.

Cover wires running through flower beds with 2 to 4 inches of mulch. The wires of the flower beds do not have to be buried as deep as those in the yard, since it will not cut them. A few centimeters of mulch is enough to hide the wires and at the same time keep them easy to locate to avoid accidentally cutting them when digging holes to add new plants. However, despite these possible traumas, a trencher is sometimes needed.

That's when the customer, usually in a commercial situation, requires high-voltage lighting. According to the National Electrical Code, the wiring required for this lighting must be installed to a minimum depth of 18. When long trenches must be so deep, the time saved digging the trench by hand more than compensates for the repairs that might be necessary. However, if it's only a short distance, digging by hand may be the best thing. Be sure to bury the wire to an extra depth (at least where the grass passes into the beds).

This will prevent the edges from cutting the wire. The wire in the beds does not necessarily have to be buried, but a layer of mulch should cover it. Wrap ties are good for bundling wires into nodes, but do not leave coils of wire. Landscape lighting is gaining popularity among homeowners for its ability to breathe new life into their courtyards, set the mood, protect property and, not to mention, increase the value and exterior appeal of their properties.

Read this blog to learn more about the specifications of garden lighting cables and what makes them stand out. Most landscape cables can be buried underground to prevent them from ruining the aesthetic appeal of the lights. You can buy affordable and sustainable landscape lighting cables from Nassau National Cable, one of the leading cable and wire markets. Landscape lighting can add a spectacular ambience to your outdoor living spaces, while making them safer and providing additional security.

Before burying garden lighting cables, call 811 and receive underground wiring locations from your utility company to avoid problems during installation. Place the wiring for the overhead lighting underground as far as possible, then staple the wires down the sides of trees or other vertical structures to reach the overhead lighting fixtures. Since these cables are low-voltage, many homeowners prefer to handle electrical garden lighting projects without the help of professionals. In the United States, the transformer for landscape lighting never exceeds 300 watts, so you should not exceed this capacity.

If LED bulbs are used, which is common in modern applications, garden lighting is extremely energy efficient. As I grew older, my interest grew too much in lighting design and how light impacts everything around us. The thickness of the wires you should choose will depend on how many lights you want to install in your garden.